TowersNerd.com
Rita - Queen of Speed Simulator
Operation Manual
Operators Manual
Rita: Queen Of Speed
Rita: Queen Of Speed
"Welcome to your new Job! As a Ride Operator Of The famous Rita Queen Of Speed Attraction at Alton Towers Resort!"
PreLoader:
When you start the The simulator you will enter a preloader. Once this has loaded you will be able to press "GO GO GO"! to enter the ride area.
When you start the The simulator you will enter a preloader. Once this has loaded you will be able to press "GO GO GO"! to enter the ride area.
Quality:
If you expirience any lag issues the best way to get rid of this is to- Right click on the simulator screen. Then Select "quality" and change it to "Low or Medium". This will change the quality of the graphics though.
If you expirience any lag issues the best way to get rid of this is to- Right click on the simulator screen. Then Select "quality" and change it to "Low or Medium". This will change the quality of the graphics though.
Start Up:
The first thing you need to do is start up Rita! So you will notice that there is a "key". This needs to be placed into the KeyHole To start up the Ride. (The Key follows the mouses movement and will snap and lock into place once you are near it).
The first thing you need to do is start up Rita! So you will notice that there is a "key". This needs to be placed into the KeyHole To start up the Ride. (The Key follows the mouses movement and will snap and lock into place once you are near it).
User Interface:
Operations Control Panel:
You will first notice there are 2 sides to the UCP (User Control Panel) The Left side controls train 1 and the Right Side operates train 2. The centre buttons operate everything else that is not linked to 1 train in specific. (Music/Engineers and Shed).
You will first notice there are 2 sides to the UCP (User Control Panel) The Left side controls train 1 and the Right Side operates train 2. The centre buttons operate everything else that is not linked to 1 train in specific. (Music/Engineers and Shed).
Events:
The Events panels display the location of the trains accordingly to their place on the actual track.
The Events panels display the location of the trains accordingly to their place on the actual track.
Clock Night / Day Mode:
The Clock which is located underneath the countdown lights, counts down to night mode and displays how long you have been playing the rita sim. Day Mode is longer then Night Mode and should not effect normal operation.
The Clock which is located underneath the countdown lights, counts down to night mode and displays how long you have been playing the rita sim. Day Mode is longer then Night Mode and should not effect normal operation.
BreakDowns:
BreakDowns are completely Random. These will happen at any time so watch out! Make sure you have engineers on stand by. Your UCP will change instantly and the audio breakdown speel will play. When this happens you will need to press "Send Engineers" This will then send the Engineers to Fix the Problem on Rita. Once they have finished fixing Rita operation will return back to normal from the point you left off at.
BreakDowns are completely Random. These will happen at any time so watch out! Make sure you have engineers on stand by. Your UCP will change instantly and the audio breakdown speel will play. When this happens you will need to press "Send Engineers" This will then send the Engineers to Fix the Problem on Rita. Once they have finished fixing Rita operation will return back to normal from the point you left off at.
Operating:
The sim will allow you too do a number of different commands and operations to control Rita how you want too.
Begin:
Once you have started up Rite by putting the Key in the Keyhole the first operation you can do is Press "Train 2's" "Block 3 to 2" Button. Located on the right side "Lit Green". When you press this it will turn "Red". From here on The sim will then Light buttons green or yellow to show you what commands you can do at that time to the Trains.
Once you have started up Rite by putting the Key in the Keyhole the first operation you can do is Press "Train 2's" "Block 3 to 2" Button. Located on the right side "Lit Green". When you press this it will turn "Red". From here on The sim will then Light buttons green or yellow to show you what commands you can do at that time to the Trains.
Test And Full Load Launch:
This Rita Sim will allow you to send round trains loaded or unloaded. If you want to send a car round loaded you must press "Load Train" then "harness Lock" This will give you the option to "LAUNCH" the train. And unload the Peeps once the ride has finished. If you want to test run the train. DONT "Load" peeps but instantly Close Harneses. This will then allow you to Test Launch the train and just unlock the harneses at the exit station.
This Rita Sim will allow you to send round trains loaded or unloaded. If you want to send a car round loaded you must press "Load Train" then "harness Lock" This will give you the option to "LAUNCH" the train. And unload the Peeps once the ride has finished. If you want to test run the train. DONT "Load" peeps but instantly Close Harneses. This will then allow you to Test Launch the train and just unlock the harneses at the exit station.
Shed:
Just like Rita. You can remove trains into the Shed. However there is only 1 way to achieve this in the sim.
- To get a train into the Shed. The train you want must be "EMPTY" with "HARNESES OPEN" in "STATION". The other train you dont want to go in must be located on "Block 3" or "Main Track" only.
- This will then allow you to move the train from "Station to Bay"
- You can then continue to operate the other train as normal.
- To remove that train from the Shed you must have the other train again located either on "Block 3" or sometimes on "Main Track"
- This will then allow you to move the train from "Bay To Station"
- You can then continue Normal Operation
Final Note:
You are the ride op so operate it how you want too and most importantly have fun and enjoy it!
Technical Problems and Trouble Shooting:
- If you are running the Sim on Low or Medium Quality take care when pressing the buttons. If you are too fast and catch the buttons incorrectly it may cause a malfunction and you will have to restart the Sim. So always press the buttons in their centre.
- If you do have any technical problems with the simulator Which you dont think is right like overlapping of trains. Please "PRINT SCREEN" the sim and post the image of it and tell me what quality you are running the game on.
- If you expirience any lag issues the best way to get rid of this is to- Right click on the simulator screen. Then Select "quality" and change it to "Low or Medium". This will change the quality of the graphics though.